Ein host im umija:net! Dieser Server ersetzt am Oktober 2005 den Router und dient primär als:
Inhaltsverzeichnis
- Router für Internetanbindung
-
FileServer via Samba - Druckserver
- VoIP - Server
Software
Auf dem Server läuft Debian etch mit folgenden Diensten:
Hardware
dorianus:/home/edma# lshw -short
H/W path Device Class Description
========================================================
system Computer
/0 bus Motherboard
/0/0 memory 128MB System memory
/0/1 processor AMD-K6(tm) 3D processor
/0/1/0 memory 64KB L1 cache
/0/e2000000 bridge VT82C598 [Apollo MVP3]
/0/e2000000/1 bridge VT82C598/694x [Apollo MVP3/Pro133x AGP]
/0/e2000000/7 bridge VT82C586/A/B PCI-to-ISA [Apollo VP]
/0/e2000000/7.1 storage VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
/0/e2000000/7.1/0 ide0 bus IDE Channel 0
/0/e2000000/7.1/0/0 /dev/hda disk 2014MB QUANTUM FIREBALL SE2.1A
/0/e2000000/7.1/0/0/1 /dev/hda1 disk Linux filesystem partition
/0/e2000000/7.1/0/0/2 /dev/hda2 disk Linux filesystem partition
/0/e2000000/7.1/0/0/3 /dev/hda3 disk Linux filesystem partition
/0/e2000000/7.2 bus VT82xxxxx UHCI USB 1.1 Controller
/0/e2000000/7.3 bridge VT82C586B ACPI
/0/e2000000/8 display 215CT [Mach64 CT]
/0/e2000000/9 network A1 ISDN [Fritz]
/0/e2000000/a network ISDN network controller [HFC-PCI]
/0/e2000000/b eth1 network RTL-8139/8139C/8139C+
/1 eth0 network Ethernet interface- Conceptronic PW2BIPPCI30 (S/N: 10x0105001372) HFC Chipsatz
- eth0 ist die DSL Schnittstelle
- eth1 ist die Schnittstelle zum Netzwerk der Angerschleife
Netzwerk
dorianus:/home/edma# ethtool eth1 Settings for eth1: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: d Current message level: 0x00000007 (7) Link detected: yes dorianus:/home/edma# ethtool eth0 Settings for eth0: Supported ports: [ TP AUI ] Supported link modes: 10baseT/Half 10baseT/Full Supports auto-negotiation: No Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Half Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: off Current message level: 0x00000002 (2) Link detected: yes
Harddisk Info
dorianus:/home/edma# hdparm -i /dev/hda
/dev/hda:
Model=QUANTUM FIREBALL SE2.1A, FwRev=API.0A00, SerialNo=632732029700
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=4092/16/63, TrkSize=32256, SectSize=512, ECCbytes=4
BuffType=DualPortCache, BuffSize=80kB, MaxMultSect=16, MultSect=off
CurCHS=4092/16/63, CurSects=4124736, LBA=yes, LBAsects=4124736
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=no
Drive conforms to: Unspecified: ATA/ATAPI-1,2,3
* signifies the current active mode
dorianus:/home/edma# hdparm -t /dev/hda1
/dev/hda1:
Timing buffered disk reads: 32 MB in 3.11 seconds = 10.29 MB/secStromverbrauch
Dorianus verbraucht 8,52 kWh in 264h daraus ergibt sich ein durchschnittliche Leistung von 32Watt.
Zugriff über
- http://dorianus.dyns.net update über Cron-Script
- http://dorianus.selfip.org update üder ddclient.